Aquarium DIY CO2 Generator System Kit
75,00 د.إ (Including Vat)
Just add citric acid, baking soda, water into the bottle, can produce carbon dioxide. The plant metabolic rate can be increased quickly, create the best growing conditions for fishes. It is the best choice of making CO2 equipment at home. It is easy, safe and economical. Raw material ratio: A bottle: Citric acid 200g+water 600g; B bottle: Baking soda 200g+water 200g.
In stock
Features:
Be made of aluminum alloy. It is strong, durable and efficient.
Well-sealed caps and pipes, leak-proof, non-deformed, never loose.
Professional pressure guage for pressure watching.
Cheap, simple to create pure CO2 constantly by chemical reactions.
Equipped with a safety valve, the pressure is greater than 4kg pressure will automatically, carbonated beverage bottle pressure is 8kg, safety is ensured.
The safety valve supports manual pressure . When the pressure is below 4kg, it can be manually relieved by pull the ring of the safety valve. It is very safe.
Any problem, please contact our store without hesitation. Honor to serve you!
Specification:
Name: DIY CO2 generator system
Main material: Aluminum alloy
Main color: Silver
3 type optional: CO2 generator system/CO2 generator system+bubble counter with check valve/CO2 generator system+bubble counter with check valve+solenoid
Raw material ratio:
A bottle: Citric acid 200g+water 600g
B bottle: Baking soda 200g+water 200g
Note:
1. The package does not contain containers for reaction raw materials. Please prepare 2* 1.5L or large beverage bottles (coke bottles are the best). Do not use glass bottles or beer bottles to glass bottle accidentally cracking or exploding due to excessive pressure in the bottle.
2. Boost pressure operation: If the pressure gauge shows that the pressure is too low to reach 1KG, the boost pressure operation is required. Customer needs to open the trim valve to release the gas, then close the trim valve and shake the bottle (the AB bottle is shaken together) on order to react the raw materials faster. Repeat the operation, and then observe the pressure until the pressure rising. If the pressure achieve the ideal pressure you could stop the operation. The best starting pressure is 1KG.
3. Don’t open bottle directly when there’s still on pressure, please wait for its automatic pressure release.
Package Information:
Package size: 22 * 12 * 6cm
Package weight: 333g
Gift Box Packaging
Package List:
1* CO2 generator system
1* Pressure gauge
1* Safety valve
1* Fine adjusting valve
1* 1.5m tube
2* Suction cup
1* Manual
Related products
CO2 Check Valve Stainless Steel
In stock
Steel Co2 Combo Pack 2L- Thread W 21.8
Out of stock
Dymax CO2 Tablets
In stock
Aquarium CO2 Splitter 2 & 3 Way Outlets
Out of stock
Aquarium CO2 Splitter Regulator Valve Distributor Needle Fine Adjusting Valve for Aquarium Plant CO2 Tank. With this splitter, you can easily connect up to two or more CO2 diffusers from a single CO2 cylinder. The fine adjusting valve is used for adjust the amount of carbon dioxide finely, this valve with high adjustment fineness, there is no air leakage under the high pressure system.
Dymax CO2 Indicator Solution 10ml
In stock
Dymax Crystal CO2 Indicator
In stock
Ista CO2 Starter Set
In stock
Qanvee CO2 Atomizer
In stock
Reviews
There are no reviews yet.